11
STEP 4: HANDLEBAR INSTALLATION
Insert the Hand Pulse Sensor Wires (49) into the hole on the Handlebar Post (7) and then pull them
out from the top end of the Handlebar Post (7). Place the Handlebar (8) through clamp on the
Handlebar Post (7) with hand pulse sensors facing the seat.
Hold the Handlebar (8) in desired position and fasten Clamp Cover (56
), Ø12x20x1.5 Spacer (57), and
Handlebar T-Knob (64) onto clamp. Tighten the Handlebar T-Knob (64) after adjustment.
NOTE: Handlebar T-Knob should be tightly secured before using.
STEP 5: COMPUTER INSTALLATION
Remove four M5x10 Bolts (42) from the Computer (62). Remove bolts with the Multi Hex Tool with
Phillips Screwdriver provided. Connect the Hand Pulse Sensor Wires (49) and Extension Sensor Wire
(63) to the wires that come from the Computer (62). Tuck wires into the Handlebar Post (7). Attach