8
ASSEMBLY INSTRUCTIONS
STEP 1: FRONT AND REAR STABILIZERS INSTALLATION
Position the Front Stabilizer (2) in front of the Main Frame (1) and align bolt holes. Attach the Front
Stabilizer (2) onto the front curve of the Main Frame (1) with two M8x70 Bolts (17
), two Ø8 Big Curve
Washers (14), and two M8 Cap Nuts (30).
Position the Rear Stabilizer (3) behind the Main Frame (1) and align bolt holes. Attach the Rear
Stabilizer (3) onto the rear curve of the Main Frame (1) with two M8x70 Bolts (17
), two Ø8 Big Curve
Washers (14), and two M8 Cap Nuts (30).
Foot Pedals Installation:
The Cranks, Foot Pedals, Pedal Shafts and Pedal Straps are marked “R” for Right and “L” for
Left.
Insert the pedal shaft of Left Foot Pedal (44) into threaded hole in the left Crank (39). Turn the pedal
shaft by hand in the counter-clockwise direction until snug.
Note: DO NOT turn the pedal shaft in the clockwise direction, doing so will strip the threads.
Screwdriver provided Insert pedal shaft of Right Foot Pedal (45) into threaded hole in right Crank (39).
Turn the pedal shaft by hand in the clockwise direction until snug.