NVC 360 User’s Guide
Rev.0.1 (Dec.2007)
51
Z+
Z-
Zoom in (Z+)
Zoom out (Z-)
F-
Move the focus to further position.
A/F
Auto focus.
F+
Move the focus to nearer position.
6.4.
How to upgrade NVC 360 firmware
Unless otherwise instructed, the owners of the NVC 360 are recommended to upgrade the system when
upgraded firmware is released using manual upgrade procedure.
Followings are the procedure to apply for the manual upgrade
1) Save the upgrade system software to your PC. Upgrade software can be downloaded from Inscape Data’s
home page or provided in CD.
2) Log on to administrative mode and select “Update & Reset” menu.
3) Click "Browse..." to find the files you want to use for upgrade. This will open a "Choose file" dialogue
window. The file extension is “ief”.
4) When you've found the file, click "Open." This will select the file and close the "Choose file" dialogue
window.
5) Click the "INSTALL" button. An alert message box will pop up. Click “OK” button then it will start uploading
the file. This may take some time.
6) Upgrade completion message will appear after the system upgrade has been completed.
7) Reboot NVC 360 by performing “System Reset”.
8) After rebooting, log on to the server in administrative mode again and click the “Status Report”.
9) Check the version number and release date of the NVC 360.
You can download NVC 360 system software from Inscape Data’s homepage.
http://www.Inscape Data.com
