NVC 360 User’s Guide
Rev.0.1 (Dec.2007)
25
Audio Input
Selection
Select the type of input audio.
Select
Line In
for using Line-out from audio devices.
Select
Mic
for using microphone.
Input Video
Source
This filed is set by the factory.
Video Size
Select a video size for transmission
NTSC (30frames/sec Max.) : 176x144 / 352x240 / 720x480.
PAL/SECAM (25frames/sec Max.) : 176x144 / 352x288 /
720x576
IF D1 size : Select interlace or interpolation.
Video Rotation
Check at the box to flip the video.
Max upload
rate
Assign maximum bandwidth of the uplink for the network connected to
NVC 360.
Frame rate
Assign number of video frames to be transmitted for each second. You
can improve picture quality by lowering frame rate for the same
bandwidth.
Video rate
Assign bandwidth for transmitting video data.
Audio rate
Assign bandwidth for transmitting audio data. Audio data is not
transmitted if you select “
NA
”
Check
After you finish set up of video and audio for all the channels, click on
this box to obtain the
possible maximum number of users
(
Possible
Max Users
) and
remaining network bandwidth
(
Remained
) remaining
when possible maximum users are connected.
Possible Max
Users
It shows the number of maximum simultaneous connections for the
network connection set-up.
Remained
It shows the network bandwidth remaining when
Possible Max Users
are connected.
Video Quality &
Bandwidth
Control
Limited users
Useful network bandwidth varies according to the condition of the
network. This parameter is used to limit the number of the simultaneous
connections below the number shown in
Possible Max Users
.
Save
Save the set-up parameters when the set-up parameters are done.
