NVC 360 User’s Guide
Rev.0.1 (Dec.2007)
43
Add PTZ File
Not applicable for NVC 360
Factory
Default Setting
Re-initialize the network camera to factory default state.
By checking on a Radio button “Except Network Configuration”, you can
preserve the parameters for the network. Checking on “All”, will return all
the parameters to factory default state.
Once NVC 360 is re-initialized as factory default state, it should be
set-up again using IP-Installer.
System Reset
Perform remote reset by clicking the “CONFIRM” button.
All previous connections will be disconnected upon reset. NVC 360
does not resume the connections and the users must re-connect to
the server manually.
