— 13 —
Section III
PREPARING TO CONNECT
THE 551 FRONT PANEL
Front Panel vs.
Web Interface
Setup
All setup and operating adjustments of the 551 are under
firmware control. There are no jumpers, switches or mechani-
cal potentiometers. The unit may be set-up locally through the
front-panel LCD-touchscreen, or remotely using the built-in
Webserver interface and any networked computer, tablet or
mobile device with a Web browser.
LCD and Web menus follow one another in a reasonably faithful
manner, the few differences are covered in the various discus-
sions that follow. You will at least need to access the LCD-
touchscreen to find the unit’s IP address, so some familiarity
with the front panel is useful.
Powering-Up
‘Boot’ (startup) time of 551 is just under ten seconds. When
power is first applied, or following a power interruption, the
unit is back in full operation in short order. Setup and recep-
tion parameters in effect previous to a power glitch are reload-
ed instantly from non-volatile memory into the processing core.
The LCD-
Touchscreen
The LCD-touchscreen has an adjustable timeout feature; the
factory default timeout is 5 minutes. Touching the screen will
wake it up and reset the timer. Below is an image of what you
will see initially with factory-default options.
Arrow #1 points to the Menu-select tab. Touch the screen here
and a list of all 551 LCD menus will replace the information in
the left section. You’ll have to scroll the entire list to reach
1
2
3
Summary of Contents for Dante 551
Page 1: ...551 Modulation Monitor Installation User Guide www inovonicsbroadcast com ...
Page 2: ......
Page 62: ... 58 ...
Page 64: ......