Inovonics Dante 551, Installation & User Manual

Page: 59 / 64

— 55 —
Username
and enter either the Web Admin or the Web User
password into the
Password
field, then click
Sign in
.
Lost Password
(Hard Reset)
NOTE: A ‘hard reset’ is required to bypass a local or a Web in-
terface password. This must be done at the installation site! A
hard reset not only deletes the password, but will also return
the 551 to all-factory-default settings. All User settings
will be lost! This illustrates the importance of keeping a Hard-
ware Profile current, which is discussed next.
If the password is lost, the only way you can recover control of
the 551 is at the equipment site following this procedure:
1. Disconnect AC mains power.
2. Wait 10 seconds and then reapply AC power.
3. Immediately when the Inovonics logo ‘
i
’ lights, place two or
more fingers on the LCD-touchscreen.
4. You should see confirmation on the LCD that the 551 is re-
booting with factory-default values. If this is NOT the case,
if the unit boots starting with the usual
Booting Tuner
,
Booting
HD Radio , Booting DSP sequence, perform the sequence again
until you see
Loaded Factory Default settings
heading the boot
sequence list.
The Hardware
Profile
The entire 551 ‘setup’ may be saved to your computer as a
small text file. The Hardware Profile includes user settings,
alarm notification preferences, SNMP options, passwords, etc.,
and is useful for restoring a previous setup or for cloning a
second unit for backup service.
To save a profile to your com-
puter, under Configuration click:
Download Hardware Profile . With
the Firefox browser used in this
example, Windows first asks
whether to
Open
or
Save
the file.
After clicking the
Save
button
and OK , Windows saves the file
to the Windows Downloads
folder. From there you can
move it to a location of your
choice. Other browsers may ask you directly to specify a
Save
as:
location. The file carries a default name of
551_settings.json
.
To upload (restore) saved settings, first click Select Hardware Pro-
file… under Configuration and navigate to where you have saved
the profile. When prompted,
Open
the file. Then click
Upload
Hardware Profile . This will replace all setup parameters current-
ly loaded and running in your 551 with the saved ones.
Reboot
Uploading a Hardware Profile automatically reboots the 551.
There may be other circumstances under which you might want