Inovonics Dante 551, Installation & User Manual

Page: 57 / 64

— 53 —
the Web, or you can check with the wireless carrier to confirm
the proper addressing style for Internet texting delivery.
When all recipients have been entered, click
Save . You may also
click Send Test Email , which will message all recipients to con-
firm proper communications setup. The
Status:
field will show
whether the test message has been properly formatted, dis-
patched and accepted by the email provider.
Notifications,
(Send What)
You can assign any or all alarms to any or all email or text ad-
dresses in the Notifications section.
Referring to the example here, choose a recipient 1. through 10.
by clicking the down arrow. With a
Recipient:
selected, click the
Send Emails For: boxes to choose which alarm conditions will be
reported, or alarm logs dispatched, to that individual.
In this abbreviated example, the Chief Engineer will receive a
text message on his
phone for Overmod and
Low Signal
alarms.
When you’ve finished
with this
Recipient:
,
proceed to the next.
No Save command is
necessary in this oper-
ation.
TIME SETUP
Time and DST
The onboard Real
Time Clock updates
from Internet Time
daily and has suffi-
cient inherent pre-
cision to remain ac-
curate inside this
schedule. Grab and
drag the Time Zone
(Hours):
slider for the
proper offset from
Universal Coordinat-
ed Time for your lo-
cation. In this example, the
-8
represents West Coast US (Pacif-
ic) time. The time at the top of the page will update quickly, so
you can simply drag the slider until the time shown here agrees
with your Rolex.
Daylight Saving Time:
is set to the default
Auto
mode in this ex-
ample. You may either opt for this convenience, or click the
down arrow to select
On
or
Off
for DST.