— 77 —
COMMAND
PARAMETER
DATA ENTRY INFORMATION
CALL=
Call Letters PI Calculator
For North American stations only!
Call letters entered with this command
will automatically be converted to the
proper PI code; (e.g.): WHOO.
PTY=
Program Type (Format)
1 or 2 digit number from PTY list
describing the station broadcast format;
(e.g.): 9 for N. American “Top 40”.
PTYN=
Program Type Name
8-character refined format definition;
(e.g.): BIG BAND
MS=
Music/Speech Switch
0 = Speech only; 1 = Music programming
DI=
Decoder Information
0 = Monaural-only transmission;
1 = Stereo transmission
TP=
Traffic Program
0 = Station does not carry traffic info.;
1 = Station broadcasts routine traffic info.
TA=
Traffic Alert
ON-AIR NOW
0 = Flag off; 1 = Flag on
(Flag valid only when TP=1)
TATIME=
TA Timeout
0 = Timer off; 1 - 255 = seconds between
start of TA flag and automatic reset
to OFF; 30 is recommended.
AF=
Alternative
Frequency List
Enter each AF (e.g.): AF1=88.1
To clear: AF1=0
DHCP=
Network Host Protocol
0 = Manual network address entry
1 = Network info assigned by server/router
IP=
IP Network Address
For manual entry of encoder IP
address when DHCP=0,
(e.g.): 192.168.1.6
GATEWAY=
Part of Network Address
(e.g.): 192.168.1.1
SUBNET=
Part of Network Address
(e.g.): 255.255.255.0
DNS=
Part of Network Address
(e.g.): 192.168.1.1
MAC=
Encoder’s ID
Assigned at factory, cannot be changed.
PORT1=
TCP Port No. 1
Assign number from 1 to 65535 (e.g.): 10001
Assign 0 to disable port.
PORT2=
TCP Port No. 2
Assign number from 1 to 65535 (e.g.): 10002
Assign 0 to disable port.
PORT3=
UDP Port
Assign number from 1 to 65535 (e.g.): 10003
Assign 0 to disable port.
DynDNS=
Dynamic DNS Utility
and Mode (status)
Selects dynamic DNS providers;
0 = Disabled; 1 = dyndns.org;
2 = no-ip.com; 3 = dnsomatic.com
DynDNSHost=
Dynamic DNS Host Name
Host name assigned by provider;
26 characters, max.
DynDNSUser=
Dynamic DNS User Name
User name assigned by provider;
26 characters, max.
