68
INOVANCE TECHNOLOGY EUROPE GmbH
MD800 EtherCAT Starting Guide_EN_v1.1_20211109.docx
47
This running time is cleared
The running time of the inverter is cleared to zero.
If the current running time is less than the set value (greater than 0) of F8-57 (this running
arrival time), the terminal is valid during this process, and the current running counts
Time is cleared.
If the current running time is greater than the set value of F8-57 (greater than 0), the
terminal is valid at this time, and the current running time will not be cleared.
48
Two-wire/three-wire switch
Used to switch between two-wire and three-wire control.
If F4-17 is set to 0 (two-wire type 1), when the terminal of this function is valid, switch to
three-wire type 1.
If F4-17 is set to 1 (two-wire type 2), when the terminal of this function is valid, switch to
three-wire type 2.
If F4-17 is set to 2 (three-wire type 1), when the terminal of this function is valid, switch to
two-wire type 1.
If F4-17 is set to 3 (three-wire type 2), when the terminal of this function is valid, switch to
two-wire type 2.
49
PLC status reset
Restore the inverter to the initial state of the simple PLC.
50
Swing frequency pause
In the swing frequency technology function, the terminal selects this function to pause the
swing frequency function (the inverter outputs at the center frequency).
54-63
reserved
