55
INOVANCE TECHNOLOGY EUROPE GmbH
MD800 EtherCAT Starting Guide_EN_v1.1_20211109.docx
Run key
In the start-stop control mode of the operation panel,
it is used for running operation.
Stop command /
fault reset
In the running state, it is used to stop the running
operation.
In the fault alarm state, it is used to reset operation.
8.2
INVERTER MODULE LEDS
Table 1 - Description of Inverter Module Indicators
Indicator symbol
Indicator name
Status description
PWR (yellow)
Power Indicator
Steady on: The device is in the power-on state.
Off: The device is powered off
RUN (green)
Running lights
Steady on: The device is in operation.
Off: The device is in a stopped state.
Flashing: operated by rectifier keyboard
ERR (red)
Alarm indicator
Steady on: The device is malfunctioning.
Off: The device is normal.
Flashing: The device has an alarm
8.3
RECTIFIER MODULE DISP LAY
Keypad Data Display
•
Axis number
Two-digit digital tube display, 0 means rectifier module, 1~8 means inverter module.
•
Status display area
Table 2 - Status icon description
Icon
Name
Function description
Status description
Axis (AXIS)
Multi-axis switch key
_
Torque control
(TC)
Torque control mode
Steady on: the device is in torque
control mode
Blinking: the device is in the state of
autotuning
Forward (FWD)
Forward running
_
Reverse (REV)
Reverse running
_
Wi-Fi
Wi-Fi connection mode
_
Remotely
Remote connection mode
Steady on: The command source is
selected as the terminal control
channel
Blinking: The command source is
selected as the communication control
channel
