PC/TV Link Disk, pg. 19
Solutions to Specific Problems:
Error: "The Device 'Generic volume' cannot be stopped right now. Try stopping
the device again later.
Cause: Some programs still have open files on the Link Disk.
Solution: Close all windows and stop all programs using the PC/TV Link Disk. Then
try again.
Error: "Hi-Speed Device connected to Low-Speed Port."
Cause: The PC/TV Link Disk supports USB 2.0 Hi-Speed data transfers, but the USB
Host controller does not.
Solution: Not all USB ports have the hardware to support USB 2.0 devices. If the
Computer has a USB 2.0 Port, try moving the Link Disk to that port. If no built in
USB 2.0 ports are available, consider purchasing an add-on card. USB 2.0 add-on
cards are available for Desktops (PCI add-on cards) or Laptops (Cardbus add-on
cards).
Error: Drive is listed in "My Computer" but not able to open the drive or save files
to the drive.
Cause: Drive needs to be formatted. Windows 98SE/Me will display a drive that is
properly partitioned even if it is not yet formatted.
Solution: Right click on the drive and select "Format" to create a new File Allocation
Table in the Partition.
Error: FAT32 is not listed as a partition type in the Windows Create Partition
Wizard.
Cause: FAT32 cannot create a volume larger than 32 Gigabytes.
Solution: Use NTFS (if you using Windows 2000/SP) or create a partition smaller
than 32 Gigabytes (32000Mb) see “Selecting the Partition Type” on page 10.
T
ROUBLESHOOTING
T
IPS
(
CONT
’
D
)
