PC/TV Link Disk, pg. 11
Partitioning the Drive under Windows XP and Windows 2000:
Note: The PC/TV Link Disk will not work when initialized as a "Dynamic" disk type. Do not
upgrade the hard disk to the "Dynamic" disk type; always use it with the "Basic" disk type.
1.
To partition the Link Disk under Windows 2000 or Windows XP, you must first install
the Hard Disk under Windows, and confirm that it is properly recognized by the
Operating System. Then follow these steps:
•
In Windows 2000: click Start > Settings > Control Panel > Administrative
Tools > Computer Management. This opens the Computer Management
Window. (see fig 3)
•
In Windows XP: Click Start > Control Panel > Performance and Maintenance
> Administrative Tools > Computer Management. This opens the Computer
Management Window. (see fig 3)
Fig 3
2.
Click on "Disk Management" on the left part of this window. All disk drives currently
connected to the system will be listed on the right side of the window. The Panel
also lists information about each disk, including size, partition type, and status of
each partition. Use this information to find out the Disk # that indicates the PC/TV
Link Disk.
P
ARTITIONING THE
L
INK
D
ISK
(W
INDOWS
XP/2000)
