INNOVATECH PRODUCTS & EQUIPMENT CO., INC.
6
About This Manual
This Manual contains the information and procedures to assist you to operate and maintain the Terminator®
machine safely and correctly.
Read this Manual before you operate or service the equipment.
If you need
additional information or assistance, please get in touch with our Customer Service Department:
Innovatech Products & Equipment Co.
19722 144
th
Ave. NE
Woodinville, WA 98072 USA
(425) 402-1881 or 800-267-6682
Fax (425) 402-8547
Email:
sales@the-terminator.com
NOTE:
Throughout this Manual directional instructions (left, right, up, down, push, pull, etc.) are given from
the point of view of the operator performing the action.
Terminator® Specifications
Element
English
Metric
Dimensions
Width
Length
Height
Weight (uncrated)
Blades are sold
individually
Rear tires are solid
rubber, tubeless,
white
26 inches
65 inches
47 inches
2500 pounds
.075 inches thick and
.095 inches thick
combined
15" x 8" x 11¼"
660 mm
1651 mm
1194 mm
1136 kg
1.65 mm
2.41 mm
Engine
Nissan H20 4 cylinder,
set at 3500 rpm
Uses 30 weight engine
oil
Not Applicable
Gel-cell battery
12 volts
Not Applicable
Operating speed
Idle 950-2000 rpm
Not Applicable
Propane tank
3 Gallon capacity,
approx.
4 hours operating time
11.3 Liters
Tools and Supplies
Maintenance tools and supplies are not provided with the machine. You are responsible for purchase of these
items. The following are suggested items to have on the job site.
1.) 4” or 7” Grinder
6.) WD 40
2.) 10”-15” Crescent Wrench
7.) ¾ Open End and Box Wrench
3.) 16-20 oz. Hammer
8.) Screw Driver Set
4.) Socket Set ¼ - ¾; 3/8 set or ½
9.) Safety Glasses
5.) Grease Gun
10.) Ear Plugs
