6
components that could damage the cable. Also avoid routing the cables near
ignition components or other sources of RF (radio frequency) and EMI
(Electromagnetic interference) noise.
2.3 Solenoid
Installation
-
Mount the solenoid in a suitable location away from high
temperatures or near ignition components.
-
Secure hoses with cable ties.
-
Make sure not twist or pinch any of the hoses.
-
The solenoid will make audible clicking noises when in operation,
this is normal.
-
Route the solenoid cable through the firewall, to the gauge and
connect to the 2 pin connector.
-
Confirm that you do not have any air leaks when the engine idles.
2.3.1 Internal
Wastegate
