15
When setting the SCG-1 to the slower response speed settings, the
measured mixture data will be averaged over the response time setting
before being sent via the analog output.
4.2.3
Updating the Firmware
Do not update the firmware if the versions are the same
.
A
firmware update should only be necessary if there has been a new
release that specifically fixes a problem that you are experiencing with
the controller.
1. Connect the SCG-1 to the computer and launch LM Programmer.
2.
Once connected, LM Programmer will display the current version of
the firmware that is installed in the SCG-1.
Do not flash the
firmware if the versions are the same.
3. On the ‘Info’ tab of LM Programmer you will see a button labeled
“Update Firmware,” click this button.
4. Select the firmware file with the dld extension. If there have been
revisions to the firmware, you will find them available for download
from the Support section of the Innovate Motorsports web site.
5. The software will now prompt you to confirm that you wish to
overwrite the firmware currently on your SCG-1.
6. Click OK, the gauge of the SCG-1 will go blank. DO NOT power off
or disconnect the SCG-1 from the computer until the firmware
progress screen completely disappears. Once finished, you may
disconnect the unit from the computer and exit out of the software.
4.2.4
Changing Sensor Type
Note: The SCG-1 must be running firmware version 1.08
or later with LM Programmer 4.0 or later to access the
sensor type menu.
The
SCG-1
is multi sensor compatible with the Bosch LSU 4.2 and 4.9
sensors. In order to go from one sensor type to another the
SCG-1
must be
connected to the LM Programmer software and the appropriate sensor type
must be selected. The “Sensor Type to use” setting can be found in the ‘Info’
tab when LM Programmer connects to the
SCG-1
. Once the sensor type is
changed a sensor calibration must be performed with the sensor outside of
the exhaust (see Sensor Calibration chapter.)
Sensor Cable P/N
3ft 8ft
18ft
Sensor P/N
LSU 4.2
3843
3810
3828
LSU 4.2
3737
LSU 4.9
3890
3887
3889
LSU 4.9
3888
