3
you back to the main screen. The gauge will also revert back to the
main screen if no there have been no button presses for 15 seconds.
-
From the main screen, pressing and HOLDING both the left and right
interface buttons will disable/enable Valet mode. If there are no other
error codes on the status viewport of the screen, the PSN-1 will
display “Valet”.
4. Shift
Light
-
Illuminates when the trigger shift RPM is reached.
1.1
Changing the PSN-1’s gauge face and/or bezel
1.
Lay the PSN-1 face down and remove the three #2 phillips screws
from the outside rim of the back plate.
2.
3.
Configure the gauge as desired by changing the gauge face and/or
bezel.
4.
Make sure every piece is positioned correctly using the locating tab
and reassemble the gauge.
5.
Reinstall the three #2 phillips screws verifying that the buttons are
not binding on the gauge lens.
