INNOVASON SY40, User Manual

Page: 236 / 244

9-30 R
ACKS AND
M
ODULES
T
ECHNICAL
C
HARACTERISTICS
User Guide - © InnovaSON - May 2004
Ethernet standard switch
Breakout box ES8out #1:
FOH 1 LCR and SUB, channels 1 to 4
FOH 2 LCR and SUB, channels 5 to 8
Example 2: Sy80 used in a Front of House mix position with 24 ES channels.
The configuration below shows an Sy80 console’s Mix Box fitted with 24 analogue outputs and 24 ES
channels. The line inputs and outputs of the DSP Sy80 module and the analogue and digital input
modules complete the audio resources that would probably be used with a Stage Box.
The 3 DO-8XES modules are placed in D, E and F
and addressed respectively to 0, 1 and 2 with their
coding wheels. Module D uses
ES channels 1 to 8;
E uses 9 to 16, and F channels 17 to 24.
Patch OUT is used to assign the Sy80 mix buses to
the
ES channels with, for example:
The ES breakout boxes are configured to output the corresponding channels.
A star network, here adapted to the geographic needs of the location, is achieved with an Ethernet
switch (see Digigram recommended models). The ES8out modules 1 and 2 are ‘daisy chained’, as are
the 3 ES2out boxes. The network may have other topologies depending on the requirements of the
installation. Channel assignments stay independent of the network cabling.
In this example the analogue outputs can be used for monitoring, effect sends, extra loudspeakers etc
where an
ES network is not possible. Alternatively AES outputs could be taken from the DO-8XES
modules. This type of configuration is extremely flexible.
Breakout box #2 :
‘front fills’ LCR, channels 9 to 11
‘side’ LR, channels 12 and 13
Breakout box ES8out #3:
Delay 1 LCR, channels 14 to 16
Delay 2 LCR, channels 17 to 19
‘Broadcast feed’ LR, channels 20, 21 (1 ES2out)
2 ES2out boxes for 3 commentators mix-minus, channels 22 to 24