manualshive.com logo in svg

Innovaphone IP110, Manual, Page: 48 / 53

Share
Download
Innovaphone IP110 Manual Download Page 48

Page 48

Manual IP110 Release 6.0

Table 5

Optional functions of the programmed Function keys

By selecting one of the functions mentioned in Table 5, an associated index card
opens up, whose setup is self-explanatory for trained administrators. The details
are not explained any further in this manual.
Depending on the of the VoIP telephone model, there may be more available
function keys on the Web interface than your telephone can assign. Please
remember that your IP110 only has four function keys at its disposal.

Partner

The LED of the function key shows the 
condition of the existing partner lines 
(available, ringing, engaged).
When signalling a call on the partner line 
(e. g. LED blinks), a
pickup of this call can be carried out.
If partner line is in idle mode, the key is 
used as an abbreviated dialling key.

Message Waiting

The status of a Message Center Account 
can be viewed by pressing the function key 
(e. g. voice mailbox or email account).
This function is only available if at least 
Release 6.0 is used for the innovaphone 
PBX telephone system.

Note

The 

Partner

 and 

Pickup

 functions can only be used if both partners belong

to the same group. The same group is selected in the innovaphone PBX from
the 

Group indications

 menu in the configuration menu of the respective

user.

Summary of Contents for IP110






















































Reviews:

No comments