Page 22
Manual IP110 Release 6.0
3.2.11 Initiating a conference
You can use this function to set up a conference between two lines. To do so,
you need an active line and a line on hold (refer to Section 3.2.8, "Making second
calls", beginning on page 19).
Fig. 14 Conference
1. Press the key during a call with an active line and a line on hold.
A conference is set up between the active line and the line on hold. All
the subscribers can now talk with each other (see Fig. 14).
2. You can end the conference by pressing the key again. The call put
on hold prior to the initiated conference is now on hold again and the
previously active call is active once again.
3. To terminate the active line, you must press the Clearing key . The
connection to the active conversation partner is terminated. Observe
also the tip in Section 3.2.8.
3.2.12 Return call if engaged
An automatic return call can be initiated if the line of the called party is engaged.
The IP110 indicates that the line is free as soon as the called party has
terminated the call. The call is initiated and the opposite telephone rings as soon
as you pick up the handset of the IP110. The telephone network of the call
partner must support this feature.
1. If the engaged signal can be heard, press the key and hang up in
order to activate the automatic return call function. Wait for the return
call signal.
2. When return call is signalled,
a) pick up the handset or press the Loudspeaker key to initiate the
return call. The call with the opposite party is set up or
b) Press the Clearing key to prevent the return call from being set up.
