Innovaphone IP110 Manual Download

Page: 39 / 53

Manual IP110 Release 6.0

Page 39

3.5.4 Call diversion

The

Call diversion menu

enables you to be available even in your absence.

The IP telephone supports three different types of call diversions:
•

permanent diversion

: All calls are immediately diverted to another

subscriber.

•

engaged

: In this case calls are diverted if there is already an active call.

•

delayed

: In this case calls are diverted which have not been answered

within a certain period of time.

Call diversion setup and activation/deactivation

1. In the initial condition, press the key .
2. With the Arrow keys, select

the menu

Switches

3. Press the key

. The display appears in Fig. 25.

4. With the Arrow keys, select

the menu

Call diversion

. The display

appears in Fig. 27.

Fig. 27 Call diversion menu

5. With the arrow keys, select

the desired call diversion type:

permanent

engaged

delayed

6. If you now press the

key, you can switch between "

" and "

off

7. Using the arrow keys

, switch to the line below the desired call

diversion type.

8. Enter the telephone number of the desired call diversion destination.

Tip

In the initial condition of the IP telephone, active call diversions are indicated
by the symbol in the status line. The destination of permanent diversions
is also displayed.

Summary of Contents for IP110






















































Search results

Summary of Contents for IP110

Reviews:

Related manuals for IP110

Brands by name

Popular brands

Innovaphone IP110, Manual

Search results

Summary of Contents for IP110

Reviews:

Related manuals for IP110

Brands by name

Popular brands