Innovaphone IP110 Manual Download Page 40

Page: 40 / 53

Page 40

Manual IP110 Release 6.0

9. To save the selection, leave the menu by pressing the key three

times.

The call diversion is now active and shown in the display of the IP110.

3.5.5 Changing users

The menu

Change user

is component of the

Multiple registration

and

described in detail in Section 3.4.4, "Multiple registration", beginning on page 35.

3.5.6 Ring tone

In the

Ringtone menu

the melody, volume and speed of the internal and

external ringtone can be set up and listened to.

1. In the initial condition, press the key .
2. With the Arrow keys, select

the menu

Switches

3. Press the key

. The display appears in Fig. 25.

4. With the Arrow keys, select

the menu

Ringtone

5. Press the key

. The display appears in Fig. 28.

Fig. 28 Ring melody menu

6. Press the

key to select

Internal ringtone

External ringtone

All other changes only refer to the internal or external ringtone variation.

Setting a melody:

Using the arrow keys, select

the second line

and press the key

or.

to set the melody.

Prelisten:

In order to prelisten to the currently set ringtone, use the

arrow keys to select

the entry

Start

in the third line and activate

the playback by pressing the key

. The entry switches to

Stop

Playback can be stopped by again pressing the

button.

Adjusting the volume:

Using the arrow keys, select

the fourth

line and press the key

or.

to set the volume.

Summary of Contents for IP110






















































Search results

Summary of Contents for IP110

Reviews:

Related manuals for IP110

Brands by name

Popular brands

Innovaphone IP110, Manual

Search results

Summary of Contents for IP110

Reviews:

Related manuals for IP110

Brands by name

Popular brands