Manual IP110 Release 6.0
Page 35
You are returned to the subscriber data.
3.4.4 Multiple registration
Multiple registration makes it possible to register up to 4 different users for a
IP110. The display indicates, which incoming calls are for which user. The data
of the active user is used for outgoing calls. If the call data of another user is to
be transmitted, the active user must be put on hold before the call is set up.
This feature enables a variety of options. It is possible, for example, for a co-
worker working at several locations to log on to the telephone at different
workplaces. Or it is possible to implement the telephone exchange or hotline
function by allowing co-workers to log on as joint users of this circuit. It is also
possible to stand in temporarily for a colleague (his/her call number) with
multiple registration.
Joint user setup
The registration of the (up to 4) joint users ensues by editing the menu
Registration 1
to
Registration 4
on the Web interface of the IP110. Refer to
the Section 4.1, "Web interface of the IP110", beginning on page 46.
After the joint user data has been entered on the Web interface of the IP110,
calls for the active user of the telephone as well as for the joint user are signalled.
Tip
This feature can only be used if it is possible to register call numbers at several
telephones in the PBX component.
For further information refer to the "Administrator Manual - innovaphone
PBX“.
