Page 16
Manual IP 100 version 5.01
3.1.3 Making calls
Proceed as follows to make a call:
Fig. 5 Direct dialling
1. Pick up the handset or press the loudspeaker key
.
2. Enter the phone number. The number will be dialled.
3. At the end of the call, hang up or press the loudspeaker key
.
You can also enter the phone number first and then pick up the handset or
press the loudspeaker key
.
During a call, all digits which are entered are transmitted as DTMF signals. You
can remotely control terminals like this.
3.1.4 Redialling
Up to 30 of the last numbers dialled are saved automatically, together with the
time and date, and can be dialled again.
Fig. 6 List of recently diallembers
1. In the idle state, press the dial key
. The most recently dialled numbers
are displayed (see fig. 6).
2. Use the arrow key
to select one of the numbers. The time in the display
(in the illustration above “
0:0:8
”) says that the call lasted 8 seconds.
3. With the
key you can call up options such as call, store and delete.
To start dialling, lift the handset, press the loudspeaker key
or select
“Call” and confirm with the
key.
Line 1
6677
Call
25/02/05 13:33 2
1x 0:0:8
72
Options
