Operationinstructions1
I
SLEEP mode
SLEEP
mode can be set in
COOLING ,HEATING
or
DRYING
mode.
This function gives you a more comfortable environment for sleep.
• The appliance will stop operation automatically after operating for 8 hours.
• Fan speed is automatically set at low speed.
•
How to set SLEEP mode ?
Each time
8
button is pressed.
Result:
The operation mode is changed in sequence:
�
\;
�
�
SLEEP 1 --+ SLEEP 2 --+ SLEEP 3 --+ SLEEP 4 --+ QUIT SLEEP MODE
SLEEP mode 1:
•
• Set temperature will rise by 2·c at most if the appliance operates in cooling mode for 2 hours constantly,
then keeps steady.
• Set temperature will decrease by 2·c at most if the appliance operates in heating mode for 2 hours
constantly, then keeps steady.
SLEEP mode 2:
• Set temperature will rise by 2·c if the appliance operates in cooling mode for 2 hours constantly, decrease
by 1
°
C after 6 hours, then decrease by 1
°
C after 7 hours.
• Set temperature will decrease by 2
°
C if the appliance operates in heating mode for 2 hours constantly, rise
by 1
°
C after 6 hours, then rise by 1 °C after 7 hours.
SLEEP mode 3:
• Set temperature will rise by 1
°
C if the appliance operates in cooling mode for 1 hour , rise by 2
°
C after 2
hours, then decrease by 2·c after 6 hours,
decrease by 1
·c
after 7 hours.
• Set temperature will decrease by 2·c if the appliance operates in heating mode for 1 hour , decrease by
2·c after 2 hours, then rise by 2·c after 6 hours, rise by 2·c after 7 hours.
SLEEP mode 4:
• Set temperature will keeps steady.
Note: Press SUPER ,SMART, MODE or FAN button cancel SLEEP mode.
Note: By pressing "Sleeping mode" four times, or selecting other modes like SUPER, SMART, OR FAN,
you could cancel the sleeping function of those units without four sleeping curves.
Note: Heating is NOT available for cooling only air conditioner.
INNOVAIR DC INVERTER QUANTUM
REMOTE CONTROL MANUAL
w w w . i n n o v a i r . c o m
9
