Operation instructions
I
Airflow direction control
Vertical airflow(Horizontal airflow) is automatically adjusted to a certain angle in accordance with the
operation mode after turning on the unit.
Operation mode
COOLING, DRY
*HEATING,
FAN ONLY
Direction of airflow
horizontal
downward
.
8 ---- 8
(;;=
�
The direction of airflow can be also adjusted to your own requirement by pressing the
11
CE:::JD
II
button of
the remote controller.
*Heating mode is only available for heat pump models.
+ Vertical airflow control (with the remote controller)
Using remote controller to set various angles of flow or specific angle as you like.
Press
11
(:;=
11
button once.
Result:
The vertical adjustment louver will swing up and down automatically.
Press
11
(:;=
11
button again .
Result:
The louvers swing to a suitable angle as desired.
.----------------------------------
1
+ Horizontal airflow control (with the remote controller)
1
Using remote controller to set various angles of flow or specific angle as you like.
Press
1
1
� 1
1
button once.
Result:
The horizontal adjustment louver will swing left and right automatically.
1 Press
11 � 11
button again .
Result:
The louvers swing to a suitable angle as desired.
NOTE:lf the unit doesn't have four ways airflow function, you can adjust
horizontal airflow by yourself.
JI\.
Iii
CX) Do not turn the vertical adjustment louvers manually, otherwise malfunction may occur. If that happens, turn off the
unit first and cut off the power supply, then restore power supply again.
OD
It is better not to let the vertical adjustment louver tilt downward for
a
long time at COOLING or DRY mode to prevent
condensed water from dripping.
INNOVAIR DC INVERTER QUANTUM
REMOTE CONTROL MANUAL
4
