Operation instructions
I
SMART
mode(invalid for multi system)
•
How to set SMART mode?
Press the
8
button.
Result:
Enters
SMART
mode(fuzzy logic operation)
directly regardless of the unit is on or off.
Temperature and fan speed are automatically
set based on theactual room temperature.
Heat pump models
Indoor temperature
Operation mode
21
°
C or below
HEATING
21
°
C-23
°
C
FAN ONLY
23
°
C-26
°
C
DRY
Over 26
°
C
COOLING
Cooling only models
Indoor temperature
Operation mode
23
°
C or below
FAN ONLY
23
°
C-26
°
C
DRY
Over 26
°
C
COOLING
Ill
SMART button is ineffective in SUPER mode.
Ill
Press MODE button cancel SMATR mode.
Target temperature
22
°
C
Room temperature
decrease 2·c after
operate for 3 minutes
26
°
C
Target temperature
Room temperature
decrease 2·c after
operate for 3 minutes
26
°
C
Note: Temperature, airflow and direction are controlled automatically in SMART mode.
However, for the inverter you can choose from
-7
to
7.
if you still feel uncomfortable.
•
What you can do in SMART mode?
Your feeling
Button
Adjust
Uncomfortable because
8
Indoor fan speed alternates among High, Medium
of unsuitable air flow
and Low each time this button is pressed.
volume.
Press it once, the vertical adjustment louver(horizontal
Uncomfortable because
((>=
A)
adjustment louver) swings to change vertical airflow
of unsuitable flow
direction(horizontal airflow direction). Press it again,
direction.
swings stops.
•
How to cancel the SMART mode?
a
Press the
v
button.
Result:
The SMART mode will be cancelled.
8
�
ODE
_,/
�
\__
ESS
I�/\
INNOVAIR DC INVERTER QUANTUM
REMOTE CONTROL MANUAL
w w w . i n n o v a i r . c o m
5
