Additional Tests
PERFORMING SERVICE RESETS
79
- Make sure the air/fuel sensor outputs the correct air/fuel ratio
after idling the engine for 10 minutes minimum.
4.
Choose
Continue
to proceed.
A “Warning” screen displays. BE SURE to observe all
precautions to prevent damaging system components.
5.
Choose
Continue
to proceed.
The Select Test screen displays.
6.
Select the desired test, then press
ENTER
.
The Test Results screen displays.
When the test has completed, an
“advisory” message displays.
Choose
Continue
to return to the
Select Test screen, or, choose
Exit
to return to the PCM Actuator Test
and Special Function Menu.
PERFORMING SERVICE RESETS
The
Service Reset
function offers up to five
options for performing service reset
procedures;
Oil Reset
,
Battery Reset
,
Steering Angle Sensor Calibration
,
EPB
Reset
and
ABS Bleeding
.
Resetting the Oil Maintenance Light
1.
While linked to the vehicle, press the
M
button.
The Main Menu displays.
2.
Select
Oil Reset
, then press
ENTER
.
The Oil Reset screen displays.
If the vehicle under test is equipped with a navigation system,
choose
Yes
to continue.
If the vehicle under test is not equipped with a navigation system,
choose
No
to continue.
If the Scan Tool cannot reset the Oil Maintenance Light, an
“instructional” dialog displays, showing the manual
procedures for resetting the indicator light. When finished
viewing the instructions, press the
M
button to return to the
Main Menu.
3.
The Select Reset Method screen displays.
4.
To perform the oil reset by procedure, choose
View Procedure
.
