Additional Tests
SYSTEM/ACTUATOR TESTS
49
Reverse Brake Torque Test
1.
Select
Reverse Brake Torque Test
in the Special Functions menu,
then press
ENTER
.
An “instructional” screen displays. Prepare the vehicle for test as
directed:
- Start and idle the engine.
- Make sure transmission fluid temperature is 27°C (80°F)
minimum
- Set the parking brake.
- Press and hold the brake pedal.
- Place the transmission in REVERSE.
2.
Choose
Yes
to continue.
A “status” screen displays while a vehicle status check is
performed.
3.
A “confirmation” screen displays when
the test routine begins.
A “results” screen displays when the
test has completed.
The screen shows the current
Engine Speed
,
Turbine Speed
and
Output Speed
, the
Throttle
Position Sensor Voltage
an the
Present Gear
.
4.
Choose
Finish
to return to the Special Functions menu.
PTO & Idle Up
The PTO & Idle Up function lets you perform a Power Take-Off (PTO)
and Idle Up test.
1.
Select
PTO & Idle Up
in the Special Functions menu, then press
ENTER
.
An “instructional” screen displays. Prepare the vehicle for test as
directed:
- Turn the ignition on. DO NOT start the engine.
2.
Choose
Yes
to continue.
A “status” screen displays while a vehicle status check is
performed.
The PTO Remote Speed screen displays.
3.
Select
Next
to continue.
The Select Speed screen displays.
4.
Select the desired PTO remote speed, then press
ENTER
.
The Enter Value screen displays.