Innova ARC ELIPSE, User Manual, Page: 9 / 34

ES
EN
F
D
PO
IT
Before setting the appliance go-
ing, the person installing should
read this manual carefully. The
operator should be a responsible
adult.
In the event of any anomaly, con-
tact your distributor.
1. Check the electrical voltage is
the same as the voltage dis-
played on the machine speci-
fications label.
2. Fill the reservoir with fresh wa-
ter. (see picture 1) Check the
water intake tube is immersed
in the reservoir.
The use of
mineral water is
recommended. Water quality
affects the taste and quality
of the coffee, in addition to
preventing future breakdowns.
3. Plug it into the mains.
Important:
Mobile Filter holder system
▪
A) The machine is being used
for the first time or has not
been used for some time.
Change the water in the boiler
and circuit.
1. Connect the coffee machine
with switch 0/1.
2. Put the filter holder with-
out coffee into position and a
recipient below.
3. Switch on the coffee switch
and run approximately half
a reservoir capacity of water
through it.
Careful: Check that the reservoir
has enough water.
If the coffee
machine is used without water,
pump resistance may be dam-
aged.
2
7
1
ELIPSE ARC
PICTURE 1 PICTURE 1
ES
EN
F
D
PO
IT
Start-up. Diagram 2
On/off switch
Coffee switch
Steam switch
Steam/water control
Steam/water tube
Temperature pilot light
1 7
8
9
10
11
2
3
4
5
6
10
7
Porta fijo (sólo monodosis)
1 café
Monodosis
2 cafés
Mobile filter holder (ground/pod)
Coffee group
Cup warmer
Mobile filter holder (only pod-option)
Tray
1
7
8
9
11
2
3
4
5
6
1
7
8
9
11
2
3
4
5
6
ELIPSE ARC