Instruction manual
Pag. 6 of 28
Date 2021-07-27
Progressive start (no current peaks)
The starting ramp begins at very low frequency (20 Hz) allowing to eliminate peak current at start -up.
Powerful operation
The compressor accelerates to up to 100 HZ (max cooling/heating capacity) after the starting phase, in
order to reach very quickly the room temperature set point.
Comfort
The INVERTER air conditioner continuously adjusts the compressor capacity, adapting to changes in the
thermal load, and it allows to keep the air temperature stable, always near the Set Point value, w ithout
sharp fluctuations.
Thanks to the "Brushless DC " motor and to the sound-absorbing insulation silence is guaranteed during
operation.
ECO mode (depending on fan speed selected)
The air conditioner INVERTER can vary its capacity during operation, while the traditional system can only
operate with a fixed capacity. By selecting the minimum fan speed, the compressor will automatically
switch to low frequency (40 Hz) thus reducing considerably the electrical power consumption. That can be
useful for the energy balance in case other electrical appliances are being used simultaneously.