Instruction manual
Pag. 18 of 28
Date 2021-07-27
ON/OFF
►
Il
6.0 OPERATING
From remote controller it is possible to select the On/Off mode, the cooling, heating mode, to change the set point
temperature (+ / -), to select the fan speed (min., med., max., auto).
The room thermostat must be installed in a proper position, away from direct heat source. The set point temperature
and real value are shown on the thermostat display.
display
.
6
a
liu
c
n
=
1
o
.
.
,
{fi,
"•
i
=
i
a
.,
'lr
e'
f},
*,
)Jl',_
c,J
,,-
I
l
'
The room thermostat has to be connected with the PCB through the 5 m cable ( supplied with the unit).
For the user interface display operation please read carefully the specific instructions attached
Control Panel PIN Out (environment thermostat)