1
Table of Contents
1.0 Safety Information………………………...2
2.0 Introduction……………………………...... 3
2.1 Meter Diagram (Front)………………. 3
2.2 Meter Diagram (Back)………………. 3
2.3
Features……………………………….
4
3.0 Specifications…………………………….. 5
4.0 General Meter Operation………………... 6
4.1
Battery
Installation……………………
6
4.2
Meter
Modes………………………….
7
4.3 How to Make a Probing……………... 11
5.0 Software Operation………………………. 15
5.1 Software Install………………………. 15
5.2 Software Use…………………………. 16
6.0 Trouble Shooting…………………………. 21
7.0 Maintenance………………………………. 22
8.0 Warranty & Service………………………. 23
2
1.0 Safety Information
Caution should be exercised while using this meter to assure the
safety of the user. This meter is a low voltage battery powered device
which should not cause electrical hazard to the user even when
connected to a computer via a USB cable. However, please use
caution not to service this meter or connect it to a computer in a wet
environment.
It is recommended that this meter be used with an alkaline 9 volt
battery. Such batteries can leak or explode if an attempt is made to
charge them.
Do not recharge disposable alkaline batteries.
It is typical for this meter to be used to measure fats and oils which
can be very slippery when on a users hands or if dropped on the
floor. Please use caution when working around these materials due
to a possible slipping hazard.
