InnoMedia HG8328-1W Administrative Guide
Page 28
Copyright © 2019 InnoMedia. All rights reserved.
then cancel the call.
Dial-Tone Timeout
Will play Dial Tone for this period of time
and then play fast busy.
Reorder (Fast Busy)
Tone Time Out
Will play fast busy tone for this period of
time and then play Howler tone.
Howler Tone (ROH)
Time out
Will play Howler tone for this period of time
and then become silent.
OSI Duration
When a call is terminated, place line in open
circuit for X ms. A value of 0 disables OSI.
Jitter Buffer
Setting
Jitter Buffer Mode
Adaptive – Jitter Buffer Size changes
during the call in response to network
conditions.
Fixed – Jitter Buffer Size stays at the
programmed value.
NetEQ–when NetEQ is selected, the
‘Initial Jitter buffer size,’ and
‘adaptation Min Depth’ values are not
used.
Initial jitter buffer
size
The initial jitter buffer size in ms.
Adaptation Min
Depth
If network conditions are good, and no late
packets are detected, the jitter buffer will
continue to decrease until it meets the
configured size.
4.1.7
Feature and Service Code Setting
Figure 19. Feature and Service Code Setting
