InnoMedia HG8328-1W Administrative Guide
Page 38
Copyright © 2019 InnoMedia. All rights reserved.
VMWI Tone below.)
VMWI Tone
Voice Mail Waiting Indication, indicating
that voice mail is waiting.
Confirmation Tone
Confirmation Tone is used to acknowledge
receipt for special services, such as:
Speed dialing, dial number has been
recorded.
Call forwarding activation and de-
activation, etc.
Call Waiting Tone
1-4
Call waiting tones are used for call waiting
conditions.
Howler (ROH) Tone
Receiver off hook tone
4.3.4
Ring Cadence Setting
For a telephone receiving an incoming call, ring cadence settings control the timing of the incoming ring-
signal. This varies from country to country and may consist, for instance, of the ring voltage being applied for
two seconds, followed by four seconds off, then back on for two seconds, and so on, until the phone is
answered or the calling party hangs up, or a maximum number of rings is reached. Note that HG8328-1W
supports multiple ring cadence profiles for different countries.
When shipped from the factory, the MTA’s ring cadence is set to match country requirements. You can
manually set the ring cadence if you wish to override the default country values.
Ring Cadence Setting (Format +[on1,off1,on2,off2,…])
+ : loop the tone(s) forever
[ on1 duration in ms, off1 duration in ms…]. If the duration value is 65535, keep playing the last
tone.
Figure 31. Ring Cadence Setting
Field Name
Description
Default Ring
Cadence
For a telephone receiving an incoming call,
the default timing pattern of the incoming
