InnoMedia HG8328-1W Administrative Guide
Page 55
Copyright © 2019 InnoMedia. All rights reserved.
5.16
SNMP Setting
Configure the SNMP server information for the MTA to send traps to or to get commands from the SNMP
server.
Figure 49.
SNMP Setting
Field Name
Description
Enable SNMP WAN
Access
Enable SNMP LAN
Access
Enable|Disable SNMP access from LAN or
WAN interface(s).
SNMP Port
The port for SNMP communications.
SNMP Manager
IP address or FQDN of the SNMP Manager
system.
Enable SNMP Trap
Enable|Disable sending traps to the SNMP
server. Refer to the HG8328-1W MIB file for
the list of supported traps.
SNMP Trap Sink
Port
Define an SNMP trap receiver.
Public SNMP
Community Name
Read only community string. This string is
used with an SNMP GET to access the MTA.
Private SNMP
Community Name
Read-write community string. This string is
used with an SNMP SET to set a certain
SNMP MIB variable (OID) to a specified
value.
