InnoMedia HG8328-1W Administrative Guide
Page 52
Copyright © 2019 InnoMedia. All rights reserved.
Enable SNTP
Enable the SNTP service.
Retry Interval
The time interval at which to synchronize
with the time server, in seconds.
SNTP Server #1, #2,
and #3
FQDN or IP of SNTP time servers to
synchronize with.
(Note: HG8328-1W tries all the configured
servers, and bases its calculation on RFC
2030 and the delay. It then uses the lowest
delay as the peer updates and sets the local
time.)
5.10
Language
The MTA device supports English, Spanish for Interactive Voice Response (IVR) services. Select the desired
language for your needs.
Figure 43. Language Selection for IVR system
Field Name
Description
IVR Language
Setting
The language of IVR announcements.
5.11
Uplink Connection
Figure 44. Uplink Detection Settings
Field Name
Description
Check Uplink
Network
Connection
Enable or disable the MTA to probe the
internet connection status.
Check Interval
How often device will send a ‘probe’
message out to determine whether the
