3. Pull the power supply cable through the right-hand side power inlet before fixing the charging station to the wall. Make sure
the non-stripped part of the cable reaches past the strain relief. There must be enough cable for restrain fixing and the
electrical connections. Do not tighten the fixings yet.
4. Make sure the device is in a correct position according to the screw location markings. Mount the charging station on the
wall before routing the cable.
5. Route the cabling so that you are able to connect the cable to the strain relief.
6. Attach the strain relief.
Note: The strain relief can be used in two ways depending on the cable diameter.
7. Separate the power supply wires and mark them if necessary.
8. Make sure the wires cannot come into contact with each other.
1
2
