DANGER: Do not open the charging station cover!
DANGER: Do not use a damaged charging station or charging cable.
DANGER: Do not use adaptors, conversion adapters or cord extension sets.
Troubleshooting
LIGHTS
POSSIBLE CAUSES
DETAILS
GREEN
BLUE
RED
ON
PULSING
BLINKING
Charging current limited, high
temperature.
Charging is active. The vehicle is
being charged, but the charging has
been limited 6A due to high internal
temperature.
BLINKING
BLINKING
BLINKING
Device configuration error
Charging station is not configured
correctly. Please contact a qualified
electrician to check the device
configuration. The circuit breaker must
be turned off before reconfiguring the
DIP switches.
Power relay is faulty
RS-485 communication error
Internal HW error
BLINKING
OFF
BLINKING
No RS-485 connection to host device
Charging station not operational.
Turn the circuit breaker off. Wait for
5s and turn it back on. If the same
problem persists, please contact to a
qualified electrician to check the device
configuration.
6mA residual DC current has been
detected
ON
OFF
BLINKING
Protective ground lost, 6V to 12V
change detected
Charging process has failed. Check
the charging cable for damage. If the
charging cable or its plug is broken,
contact a qualified electrician.
Disposal and recycling (WEEE)
The product packaging is made of recyclable cardboard.
In compliance with European Directive WEEE (2012/19/EU) on waste and reduction of hazardous
substances of electrical and electronic equipment, it must not be disposed of as unsorted municipal
waste. Instead this device must be collected separately in accordance with local recycling
regulations.
20
