3. Place the charging station against the wall according to the screw location markings. Mount the charging station on the wall
before routing the cable.
4. Pull the power supply cable through the cable inlet. Make sure the non-stripped part of the cable reaches past the strain
relief. There must be enough cable for restrain fixing and the electrical connections.
5. Route the cabling so that you are able to place the cable to the strain relief.
6. Attach the strain relief.
Note: The strain relief can be used in two ways depending on the cable diameter.
7. Separate the power supply wires and mark them if necessary.
8. Make sure the wires cannot come into contact with each other.
10
