2
1
Getting started _____________________________________________________________________ 3
Recommendations and warnings __________________________________________________________ 3
Packing list ____________________________________________________________________________ 3
Installation ____________________________________________________________________________ 4
1.3.1
Batteries ______________________________________________________________________________________ 4
1.3.1.1
Specifications _____________________________________________________________________________ 4
1.3.1.2
Installation _______________________________________________________________________________ 4
1.3.1.3
Replacement ______________________________________________________________________________ 6
1.3.2
Wall mount ___________________________________________________________________________________ 7
Block diagram _________________________________________________________________________ 8
Peripherals positioning __________________________________________________________________ 9
2
Identification with serial number ______________________________________________________ 10
3
Different device phases at start-up ____________________________________________________ 11
4
LED behavior ______________________________________________________________________ 11
5
Hardware reset ____________________________________________________________________ 12
6
Recovery mode ____________________________________________________________________ 13
7
Start-up __________________________________________________________________________ 15
8
Pictureframe application ____________________________________________________________ 16
Spe desktop __________________________________________________________________________ 16
8.1.1
Operating ____________________________________________________________________________________ 16
8.1.2
Test card ____________________________________________________________________________________ 19
8.1.3
Switch to Hub mode ___________________________________________________________________________ 19
8.1.4
Release ______________________________________________________________________________________ 19
Central hub __________________________________________________________________________ 20
8.2.1
Operating ____________________________________________________________________________________ 20
8.2.2
Configuration of SMH300 and SLATE106 ___________________________________________________________ 20
8.2.3
Configuration of SMH300 App ___________________________________________________________________ 22
8.2.4
Working range ________________________________________________________________________________ 22
8.2.4.1
PictureFrame version 1.10.12 (and below) _____________________________________________________ 22
8.2.4.2
PictureFrame version 1.10.13 (and above) _____________________________________________________ 22
8.2.5
Test card ____________________________________________________________________________________ 24
8.2.6
Switch to spe desktop __________________________________________________________________________ 24
8.2.7
Software release ______________________________________________________________________________ 24
8.2.8
SLATE106 device or SMH300 device replacement ____________________________________________________ 25
8.2.9
State diagram_________________________________________________________________________________ 26
9
RFID/NFC _________________________________________________________________________ 27
10
Technical specifications ____________________________________________________________ 28
