24
8.2.5
Test card
When activated, the test card content is replacing the image content issued from the App (ex: SignMeeting).
The test card gives information on the SLATE106 device.
The test card is activated by default with
Pictureframe
.
Note: In test card mode, the SLATE106 device does not display anymore the image from the hub even if it continues to download them.
You have 2 methods to inactivate the test card in central hub:
Method n°1 (preferred):
o
Activate the ‘
Slate pairing
’ mode of your SMH300,
o
Inactivate the test card for the SLATE106,
o
Then inactivate the ‘
Slate pairing
’ mode of your SMH300 (back to nominal mode).
Method n°2:
o
Connect an USB cable between the SLATE 106 and a computer
o
Edit the configuration file, and change the key which is corresponding to test card.
o
Then, eject properly the USB device with MS-Windows
o
When the test card disappears, disconnect the USB cable.
You have 2 methods to activate the test card central hub mode:
Method n°1: (Preferred one):
o
Activate the ‘
Slate pairing’
mode of your SMH300,
o
Activate the
test card
for the SLATE106,
o
Inactivate the ‘
Slate pairing
’ mode of your SMH300, (back to nominal mode).
Method n°2:
o
Connect an USB cable between the SLATE106 device and a computer
o
Edit the configuration file, and change the key which is corresponding to test card.
o
Then, eject properly the USB device with MS-Windows
o
When the test card disappears, disconnect the USB cable.
8.2.6
Switch to spe desktop
Once a central hub configuration has been done, to go back to
spe desktop
mode,
Connect a USB cable between a computer to your SLATE106 device
Remove
o
the file
.PAIRED
o
the configuration file
APPLI.CFG
.
o
the files ppk
hub.ppk
smh300.ppk
Then, eject properly the USB device in MS-Windows, to go back to factory settings.
Warning: Don’t forget to unpair your SLATE106 from your SMH300 else the SLATE106 device would be able to be
paired again automatically to the SMH300 once the USB cable is disconnected.
8.2.7
Software release
