4
CR2430
+
Installation
1.3.1
Batteries
1.3.1.1
Specifications
The SLATE106 devices are delivered with 4 CR2430 Lithium coin batteries. The main batteries features are
described below. Use the same reference to expect the best lifetime. However an equivalent reference may be used.
Type
CR2430
Nominal Voltage
3V
Typical Capacity
290mAh
Chemical System
Lithium Manganese Dioxide
Reference
2430/CR2430 VP-1 ENERGIZER LITHIUM [Energizer]
1.3.1.2
Installation
1.
Refer to
Pictureframe
application chapter, to determine if you need to install batteries into your SLATE106
(few use cases can run without battery).
2.
Place the SLATE106, with the back face in front of you.
3.
Take on the box a battery by keeping its plastic holder:
(in case the battery is not delivered with its holder, call Innes support)
CR2430 battery
Battery holder
