INMES Industrial Ltda – IM-30 MM
8
4 –
INSTALLING THE EXHAUST CABINET
To install the exhaust cabinet you must
fit the part (01) into the hose and then
attach this end of the hose over the
aluminum saw casting outlet using a
clamp 02 to tighten it. Once this
procedure is done attach the other side
of the hose over the dust collector
located inside the cabinet using a clamp
to tighten the hose.
As the saw dust is collected in a cloth
bag located inside the cabinet, we do
recommend to empty the bag at least
twice a week in order maintain the high
performance of your equipment.
In order to turn the dust collector on
and off you must press the switch 03
and then turn on the saw by pushing the
switch 04 fig. 02.
(Russia model)
1° - Attach the main switch 05 to the cabinet base 06 using the washers 07 and bolt 08 as shown in fig.
02.
2ª – Turn the main switch 05 fig.02.
3ª – Turn on the dust collector 03 fig. 02.
4ª – Turn on the saw 04 fig. 02.
1ª – Turn off the saw 04 fig. 02.
2ª – Turn off the dust collector 03 fig. 02.
3ª – Turn off the main switch 05 fig. 02.
