INMES Industrial Ltda – IM-30 MM
13
8.1 – Cutting Capacity
This machine has been designed for cutting profiles related in the following drawing below, according to
the respective cutting angles.
8.2 - Choosing the right angle you wish to cut
The IM-30 MM has a quick adjust rotation feature with precision lock position for the most used angles
(45° - 30° - 22,5° - 15° -10° ), and respectively for square and rectangles 6-8-12 and 18 sided frames, and
manual adjust for the other angles.
There are two ways you can adjust the cutting angle.
First:
The operator may use the “quick adjust rotation” feature, which is operated by squeezing the part that
looks like a bicycle brake in the middle the saw handle (next to the On/Off switch) in order to rotate the table.
When the desired angle of position has been reached, just released it to engage again.
02
03
Figure 05
01
Cut
Rotating Table 0°
Cut
Rotating Table 45°
100mm
4”
74mm
2 7/8”
(H
-
Hei
ght
)
0
50m
m
2”
100m
m
4”
147m
m
5 3/
4”
190m
m
7 1/
2”
(L - length)
(H
-
H
e
ig
ht
)
(L - length)
100mm
4”
50m
m
2”
150m
m
5 7/
8”
74mm
2 7/8”
102
m
m
4”
