INMES Industrial Ltda – IM-30 MM
3
1 – SAFETY INSTRUCTIONS
For operator safety and durability of your equipment, the instruction must be carried out with great
care when installing and operating your machine, staying alert and learn how to use the IM-30 MM.
1.1 – Safety Signals
DANGER
If the safety instruction is not followed the operator will be seriously injured or killed.
WARNING
Means if the safety instruction is not followed the operator could be seriously injured or killed.
CAUTION
Safety instruction if not carried out with care, might injury the operator.
1.2 – Before using the machine
1.3 – Blade Requirement
The saw blade must proceed the following specifications:
•
Extern diameter => 300 mm;
•
Arbor diameter => 30 mm;
•
Blades marked for 4 000 rpm or higher;
•
Blades must be appropriated for each specific material (wood or plastic);
WARNING
!
Read the owner’s manual before operating the equipment;
!
Wear safety goggles,
!
Keep the acrylic blade guard down;
!
Keep hands out of the saw blade path;
!
Turn off and wait for blade to stop, before adjusting;
!
Before plugging in the machine to the electrical INMES Industrial recommends to use a thermo
magnetic circuit breaker on the electrical source as instructed in item 5.3 described in this
instructions manual;
!
The manufacturer advice: you should make sure the circuit is properly grounded, using the
green and yellow wire for this purpose;
!
The machine must be mounted on a flat surface in an appropriate work area, well lighted and
enough air;
!
This machine only accept blade of 300mm
!
In order to obtain high performance at work, make sure that you read the owner’s manual.
DANGER
!
Do not use high speed steel sawblade because our sawblades work at a 1200rpm.
