Initio INI-9090U, User Manual

Page: 26 / 64

22
initio
®
and ANY lun
/X0 This will exclude ALL drives on Host Adapter 0.
SAMPLE CONFIG.SYS
These samples assume that the user has loaded the Initio drivers in the following
directory: c:\iniaspi.
Config.sys:
DEVICEHIGH=c:\iniaspi\aspi910u
DEVICEHIGH=c:\iniaspi\inicd.sys /R2
Explanation:
The first line loads the ASPI manager and the second line loads the SCSI disk driver
specifying that a minimum of two drive letters be reserved for each MO and removable
disk attached to the SCSI bus .
ASPI Partition & Format Utility
INIFDISK.EXE is a DOS ASPI partition and format utility. It requires the ASPI910U.SYS
and INIDISK.SYS drivers to be loaded in order for it to function properly. INIFDISK.EXE
is installed by the Initio DOSSETUP or SETUP programs. Upon invocation, the initial
screen will have two windows. The top window will list all of the SCSI devices installed
in the system. The user can highlight a particular device by using the up and down
arrow keys. The bottom window will display information about the device that is
currently highlighted in the top window. Inifdisk.exe can partition and format any SCSI
storage device that is not being controlled by the BIOS, this includes SCSI disks,
magnetic optical drives, and removable media devices. INIFDISK will display two
screens in which the bottom portion will explain all commands possible in the top window.
MS-DOS/Windows 3.1x Driver Installation