Initio INI-9090U, User Manual

Page: 13 / 64

9
initio
®
Hardware Installation
must match when mated on the host adapter board.
When attaching UltraSCSI devices, use the 50-pin UltraSCSI cable connector on
the host adapter. Align the internal cable into the host adapter and the other
cable connectors in a similar fashion into the other SCSI device connectors as
described in the appropriate manufacturers instructions.
FIGURE 4
–
Connecting the 50-pin internal flat ribbon cable
4b Installation of external SCSI cables
Installation of external SCSI cables can be performed after the cover has been
closed. The cable is limited in length to a total of six meters including any internal
cabling. The external cable can be daisy chained to include up to seven with the
host adapter in combination with internal devices. The external cable is designed
to be inserted only one way, requiring termination at the end peripheral device on
the bus (
FIGURE
5).