Initio INI-9090U User Manual Download Page 40

Page: 40 / 64

initio

Select installation type.

<ENTER>

Enter server name when prompted

<ENTER>

At this point the boot files will be copied to the hard drive.

After the files are finished being copied you may encounter the following message:

Install found the following hardware but found

More than one driver supporting this hardware

PCI.XXXX.XXXX.XXXX.XXXX.XX

Press <Enter> for a list of drivers to choose

From or <F3> to continue without selecting

Press <F3> to continue. Repeat if this screen is shown again.

A screen listing the drivers will be displayed.

INI9100

will be listed as the selected

driver. This completes loading the Host Adapter Driver, Follow the on-screen

directions to complete the Novell NetWare installation.

This will load the HAM driver. If a DSK driver is required or an updated HAM driver is

needed it is recommended that you complete the installation and use NetWares

INSTALL

utility to update/change the driver.

Adding the Initio driver to an existing IntraNetWare system

To begin the installation you will need to change the directory to the location of the

server and initialize the network server, e.g.,

Type

CD \ NWSERVER <ENTER>

Type

SERVER

<ENTER>

At the NetWare prompt, Type

LOAD INSTALL

<ENTER>.

Select

Driver Options

from the window by highlighting it using the UP or DOWN

ARROW keys, press

<ENTER>

Select

Configure disk and storage device drivers

from the window by high

lighting it using the UP or DOWN ARROW keys, press

<ENTER>

Highlight

Discover and load additional drivers

and press

<ENTER>

NetWare will load

INI9100.HAM

modify the

STRATUP.NCF

file to reflect the new

changes.

Novell NetWare Driver Installation

Summary of Contents for INI-9090U

































































Search results

Summary of Contents for INI-9090U

Reviews:

Related manuals for INI-9090U

Brands by name

Popular brands

Initio INI-9090U, User Manual

Search results

Summary of Contents for INI-9090U

Reviews:

Related manuals for INI-9090U

Brands by name

Popular brands