Initio INI-9090U User Manual Download Page 21

Page: 21 / 64

initio

MS-DOS/Windows 3.1x Driver Installation

Overview

The Initio ASPI driver will support extended SCSI command functions for MS-DOS 3.30

or later. The on-board BIOS initialized during the power up boot routine only supports

MS-DOS hard disk operation. If peripherals other than disks are used, such as CD-

ROM or MO, the Initio ASPI driver will need to be installed in addition to Initio CD-

ROM and MO drivers.

Installation

The installation procedure guides you through the installation of the Initio DOS ASPI

and the ASPI for Windows 3.1x drivers. The installation procedure described here

requires some experience in MS-DOS or Windows 3.1x system setup and administra-

tion. The device driver is transferred from the

INI-9XXXU/9XXXUW DRIVER DISK 1

the hard drive where it is automatically initialized during the system boot routine.

The

INI-9XXXU/9XXXUW DRIVER DISK 1

contains two installation programs that

perform the same task. If you have completed installing the Initio ASPI driver using the

MS-DOS based installation routine described in this Users Manual, it is not necessary

to repeat the procedure for a Windows 3.1x environment on the same system.

Installing the ASPI drivers to an existing MS-DOS system

The ASPI driver is found on the

INI-9XXXU/9XXXUW DRIVER DISK 1

. It is important

that the SCSI bus hardware, and operating system are installed correctly before

proceeding further. If you need help installing the MS-DOS operating system, please

refer to the MS-DOS manual before proceeding.

Turn on host system and boot into MS-DOS.

Insert the

INI-9XXXU/9XXXUW DRIVER DISK 1

into your floppy drive.

At the MS-DOS prompt, change to your active floppy drive (e.g., type

A: <EN-

TER>

Type

DOSSETUP

<ENTER>

(

A series of screens will guide you through the installation of

the ASPI device drivers).

The first screen sets the installation drive and directory that the ASPI driver will be

installed on. Follow the on-screen directions and/or options to continue the

installation.

To activate the device driver, reboot the system by selecting the

Reboot Now

option at the end of the installation process.

Summary of Contents for INI-9090U

































































Search results

Summary of Contents for INI-9090U

Reviews:

Related manuals for INI-9090U

Brands by name

Popular brands

Initio INI-9090U, User Manual

Search results

Summary of Contents for INI-9090U

Reviews:

Related manuals for INI-9090U

Brands by name

Popular brands